I just installed this on my 1994 cat 3406E. The return line fitting to the oil pan didn’t fit. it needed a 1” npt fitting to 1/2” npt. But I was able to get the correct fittings and have put 2k miles on the system and the oil on the dipstick still looks new. Will update as I use it.
Bought the Industrial Series 290 GPH unit for my 2016 Freightliner Cascadia DD15. The install kit that came with the unit for a DD15 was missing several key pieces, and came with several pounds of unneeded brass fittings. The install instructions say to use the fittings that are on the factory fuel filter housing. Problem is the factory unit has O-Ring fittings and the FASS uses pipe thread fittings. I had to buy a 90 deg fitting for the intake side. The return line they provided was 2 to 3 feet too short. They did provide plenty of line for the feed side. They also sent around 10 fittings that have nothing to do with a DD15 install. Maybe they had alot of extra they wanted to get rid of?
Installed went very well… took about 2hrs
Cat 3406e 2WS… Thx
Love this system headed on my other truck that’s why I put it on this one, only thing I wish I had available is a base filter. I build up to much acid with the DD 15.
I've had an OPS on all three trucks I've owned. It's a great product. One thing that's changed is they no longer give you an oil sample for each filter. Disappointing, since I will changed the oil, and pull a sample, when I install the OPS.
Just got home working on it this weak
OPS-1 Eco Pur Filter - 5 PACK
Just what I needed
Shipped out fast. Have been use it and the ops oil filtration system for several years both do exactly what is advertised that the do. Pittsburg power great job.
Anytime I order anything from Pittsburgh power I always receive it promptly
Great product. Oil sampling a breeze. Went 100,000 miles on oil. Only changed just because!
It’s an awesome product, set an a bunch of oil changes in money
OPS-1 Eco Pur Oil Analysis Sample Kit - U.S.A Mailers- 5 PACK
Good product easy to use
Received sample kit from you ok. Prepared a baseline sample, attempted to go online to report sample kit electronically, was unsuccessful. The system kept telling me the sample barcode submitted did not match the actual barcode on my sample. After 2 phone calls to OPS help center, was still unable to correct this issue. I sent sample in with provided paper. Have not received sample report via email. However, it may not have been enough time yet.
Received the oil sample kits like they where scheduled can't wait to start doing the samples
I mailed it in over a week and a half ago now and still no results
I sent the sample off 10 days ago, no results yet. Now they are taking the head off the motor looking for the problem.
Need to make return line back into block at a oil dipstick location instead of 4 inches below the bottom of oil pan.
Thanks to the team at Pittsburg power for your knowledge and help. It is truly appreciate
The part was exactly what I ordered and it got my system heater back up and working!
My tech, & I, appreciate the quick response to get the needed part into our hands.Thank You..